Open a game in Windows 10 an press a button in the MMjoy2.

If the game see the button press, the error in Game Controllers is caused due change in MMjoy2 joystick name, but the one used previous remain in Windows Register, what prevents the Game Controllers see the new name.

If is the case is need clear the Windows register, try use the button "Clear" in MMJoySetup or do this manually using Regedit.

Thanks Sokol1

Hi Sokol1,

Thanks for the reply.
I have tried using the mmjoy2 under IL2 great battles & tiny combat arena, but it is not detected,
the only game can detect it is falcon BMS, the detected controller name is MMjoy2, but I can not save the keymapping.

MMjoy2 is the same name under regedit, only there are 2 version detected:
MMjoy2-20150121 and MMjoy2-20150405.

MMjoy2-20150405 is the current version that I use.

I still do not understand which name should I change.
Please explain more.

Hello mates. I need some help. I want to build a board for the TLE 5010 sensor.Do i need to put any resistors or i just simple connect sensor to arduino?

Good morning,
I have tried to recreate the same schema, but somehow all 8 buttons are marked red....
what am i doing wrong ?
I have only connected one button for testing.


thanks for help

now i have another problem...
i have connected a register... it recognizes all 8 and all are displayed as 8 red boxes... as if they were pressed.....
what am i doing wrong ?
does anyone have another plan with a 74HC165?

Hi,

Had a look at your circuit and the pinout for the 74HC165.

The serial output from the chip is on PIN 10. You have the serial out on PIN 9 which is an output of some sort.

That's why the program is seeing it as pushed.

Change the Yellow wire to pin 10 and that should work.

Hope this helps you.

Cheers,

AndyB