Previous Thread
Next Thread
Print Thread
Rate This Thread
Hop To
#3660698 - 10/11/12 01:55 AM Starting with Falcon 4 BMS Update 4 *****  
Joined: Jun 2005
Posts: 16,082
- Ice Offline
Veteran
- Ice  Offline
Veteran

Joined: Jun 2005
Posts: 16,082
Philippines / North East UK
Falcon 4 BMS 4.32 is the best version of the venerable Falcon 4 F-16 simulation to date. Bringing in modern "features" such as a fully-working, fully-clickable 3D cockpit with working gauges while still retaining the depth of Falcon 4 all for the low, low entry price of $0.00/£0.00/EUR0.00 (price dependent on your location of course), it is no surprise that it is attracting people from the I-got-no-clue-how-to-do-the-Falcon-dance new pilots to those who've spent a few months/years with the various other flavors of Falcon (OF/FF/AF) and are giving the sim "another chance" to those who've flown Falcon 4 for over a decade and can recite checklists in their sleep.

However, the install procedure for Falcon 4 BMS can be quite confusing. First of all, the BMS installer will look for the original Falcon 4 .exe file. Yes, the original one, so Falcon 4 Allied Force will not work... and this is where most people get confused. So yes, you will have to find a copy of the original Falcon 4.0, eBay and Amazon are good sources, or another virtual pilot can probably lend you his CD, but be prepared for total annihilation if you so much as scratch the CD!! I was lucky enough to get a free copy from Reschke early 2011 and surprisingly BMS came out by September, so thanks Reschke!! winner

Another common source of confusion is the installer and Update process that BMS is using. It is quite unique and difficult to use at first, though it kinda makes sense after a few Updates smile So here is the install process that I hope will help new pilots get from "WTF?!" to "OMG, this RAWKS!" in as short a time and as pain free as possible.

So here's how to install Falcon 4 BMS:

1. Download the relevant files from the BMS website. You should end up with 4 files, the zipped base installer and the 3 Updates.



2. Unzip the installer and you should get these files under \Falcon_BMS_4.32_Setup\Falcon BMS 4.32 Setup folder. If you only get the \Falcon BMS 4.32 Setup folder, delete that and unzip the folder again using the "Extract to [folder name]" command and not "Extract Here"



3. Under the \data folder, you will initially get only these files



4. Double-click Update 1 to apply it to the base installer.



5. Navigate to your \Falcon_BMS_4.32_Setup folder and notice that it'll append the \Falcon BMS 4.32 Setup at the end of the line, that is why Step #2 above is important!






6. After a few seconds, it'll finish applying Update 1 and now your /data folder will show the Update 1 .bsf files.



7. Do the same for Update 2 and notice the .bsf files now in the /data folder



8. Do the same for Update 3 and notice the .bsf files now in the /data folder



30 Dec 2012
EDIT: Added Update 4.

9. Do the same for Update 4 and notice the .bsf files now in the /data folder



And that's it! You now have your base installer updated and it will install BMS and automatically apply all updates to your sim!


12 Nov 2012
EDIT: Updated the steps and pics to reflect a clean install.


30 Dec 2012
EDIT: Clean Install of Update 4.


10. Double-click the Setup.exe file and you will see this window first. Click Next.



11. EULA... Read if you can! dizzy RTFM



12. Point the installer to your Falcon 4 CD or a folder that contains the .exe file. Again, you will need the ORIGINAL Falcon 4 CD, Allied Force will not work.



13. Select where you want your copy of Falcon 4 BMS to be installed to. I placed it on my C: drive as that is my SSD drive.



14. The installer will now check whether all the files have been downloaded properly.



15. After verification, it should recognize that you have the base BMS program and all three four Updates downloaded and ready to install.



16. Just select all the files under the Downloaded box, click Next, and the install process should begin!



17. BMS is now being installed on your PC!



18. Once done, select any of the options you want the installer to do before wrapping up...



19. And that's it, done! Falcon 4 BMS is now installed!



19a. You can re-run the setup to check what you have installed. The installer will again verify the files you have on your PC. This is how it should look like with Falcon 4 BMS Update 4 installed.






A few points to remember:
  • You will need the ORIGINAL Falcon 4.0 .exe, the Allied Force .exe will not work
  • There is NO NEED to install Falcon 4.0 before, during, or after installing BMS. The BMS installer will simply look for the .exe and will install BMS once it is happy with the presence of the .exe file.
  • Falcon 4 BMS will NOT need the Falcon 4.0 .exe or CD anytime after the install. The .exe check is a one-time check during installation; you can play BMS afterwards with no need for the Falcon 4.0 CD so keep that CD in a safe place!



So there you have it! Falcon 4 BMS install procedure --- the new Falcon 4 dance! Enjoy! dancinfools

matrix mycomputer salute



- Ice
Inline advert (2nd and 3rd post)

#3660703 - 10/11/12 02:06 AM Re: Starting with Falcon 4 BMS Update 3 [Re: - Ice]  
Joined: Jun 2005
Posts: 16,082
- Ice Offline
Veteran
- Ice  Offline
Veteran

Joined: Jun 2005
Posts: 16,082
Philippines / North East UK
**space reserved**

Topic: Mods


- Ice
#3660704 - 10/11/12 02:07 AM Re: Starting with Falcon 4 BMS Update 3 [Re: - Ice]  
Joined: Jun 2005
Posts: 16,082
- Ice Offline
Veteran
- Ice  Offline
Veteran

Joined: Jun 2005
Posts: 16,082
Philippines / North East UK
**space reserved**

Topic: Setups


- Ice
#3661308 - 10/11/12 08:53 PM Re: Starting with Falcon 4 BMS Update 3 [Re: - Ice]  
Joined: Oct 2011
Posts: 356
CTR69 Offline
Member
CTR69  Offline
Member

Joined: Oct 2011
Posts: 356
Now if only the mods would drop in here, archive the ancient F4 threads and make this one a sticky...

#3708695 - 12/30/12 08:53 AM Re: Starting with Falcon 4 BMS Update 3 [Re: - Ice]  
Joined: Jun 2005
Posts: 16,082
- Ice Offline
Veteran
- Ice  Offline
Veteran

Joined: Jun 2005
Posts: 16,082
Philippines / North East UK
Changed first post to include Update 4.


- Ice
#3734385 - 02/12/13 04:51 PM Re: Starting with Falcon 4 BMS Update 3 [Re: - Ice]  
Joined: Jun 2009
Posts: 792
PropNut Offline
Member
PropNut  Offline
Member

Joined: Jun 2009
Posts: 792
Greenville, Michigan
Thanks for this - ICE, you da Man!


F/A-18C Hornet cockpit build project:

http://hornetpits.org/index.php?topic=15.0
#3734449 - 02/12/13 07:38 PM Re: Starting with Falcon 4 BMS Update 3 [Re: - Ice]  
Joined: Jun 2005
Posts: 16,082
- Ice Offline
Veteran
- Ice  Offline
Veteran

Joined: Jun 2005
Posts: 16,082
Philippines / North East UK
Glad to have helped, sir! Note that I do not take any responsibility for lost time, money, wife, kids, jobs, or any other items of "value" due to the installation of this sim. matrix

Good luck!


- Ice
#4089964 - 03/10/15 04:35 AM Re: Starting with Falcon 4 BMS Update 4 [Re: - Ice]  
Joined: Dec 2012
Posts: 3
TonyB Offline
Junior Member
TonyB  Offline
Junior Member

Joined: Dec 2012
Posts: 3
I'm trying to install BMS4.32 U1-U7. Hopefully after studying both your post on this subject
and that of BMS, I'll finally have a fully operational, funable and cool Falcon 4 to tear up
the sky (and the enemies) with.

Thanks for the Post.........TonyB

#4090062 - 03/10/15 12:33 PM Re: Starting with Falcon 4 BMS Update 4 [Re: - Ice]  
Joined: Jun 2005
Posts: 16,082
- Ice Offline
Veteran
- Ice  Offline
Veteran

Joined: Jun 2005
Posts: 16,082
Philippines / North East UK
You're welcome. IIRC, BMS now has a U1-U6 installer so all you need to do is add in U7.


- Ice

Moderated by  RacerGT 

Quick Search
Recent Articles
Support SimHQ

If you shop on Amazon use this Amazon link to support SimHQ
.
Social


Recent Topics
Grown ups joke time
by NoFlyBoy. 03/18/24 10:34 PM
Anyone Heard from Nimits?
by F4UDash4. 03/18/24 10:01 PM
RIP Gemini/Apollo astronaut Tom Stafford
by semmern. 03/18/24 02:14 PM
10 years after 3/8/2014
by NoFlyBoy. 03/17/24 10:25 AM
Hans Zimmer North American concert tour 2024
by NoFlyBoy. 03/16/24 10:54 PM
Steam Spring Sale.
by RedToo. 03/15/24 09:09 PM
Starship Attempt Three
by F4UDash4. 03/14/24 12:06 PM
This is one cool turbofan model
by Zamzow. 03/14/24 02:41 AM
Map Errors
by F4UDash4. 03/13/24 11:25 AM
Copyright 1997-2016, SimHQ Inc. All Rights Reserved.

Powered by UBB.threads™ PHP Forum Software 7.6.0