Hi all,
The lower wing was not fitted directly to the top of the fuselage but was located on four mountings and just clear of the fuselage.
The front a rear wing spars of the lower wing passed across the fuselage through these mountings.
The kit instructions show the mountings, but they are not supplied in the kit.
Therefore representations of the mountings need to be created.
The mountings were made from brackets in the ‘Jadar’ WW1 1:48th scale control horns (S48087) photo-etch set and 0.5 mm diameter Brass rod.
I also used 0.5 mm rod to make the grab handles for the rear of the fuselage, which again are not supplied in the kit,

Mike