Hi all,
I've started on the pre-rigging, which for this model is all on the lower wings and fuselage.
This is mainly because of the tight proximately of the anchor points at the wing roots for the twin flying wires.
All done using, for a change, ‘Maxima’ Chameleon mono-filament 0.12 mm diameter.
The tubing is 0.5 mm diameter that was pre-blackened using 'Blacken-It' solution.
I still have the rudder, undercarriage and under fuselage rigging to do before the upper wing can be fitted,

Mike

[Linked Image]

[Linked Image]


[Linked Image]

Alienware Aurora R5
Windows 10 64 bit
Intel i7-6700K 4.2Ghz
Two GTX 1080 Foundations in SLI (8 Gig each)
32 Gig DDR4 2133Mhz
1TB SSD boot drive - 1TB SATA storage drive
5.1 Surround Sound
34" Dell Ultra Sharp U3415W (3440x 2440)
CH Pro-Pedals, Stick and Throttle
TrackIR-5 Pro