I've got the metal replacement wing mounts in place, and some new lights from Gemini car models in Italy.
Over the weekend I started wiring the engine, and on the first try at heating the shrink tube I got distracted and melted the plate that all the connectors mount to - a careless error! I tried straightening it with hot water but it was too far gone.
Nothing for it but to make a new one, which was simple enough. I cut a piece of plastic card, and took off the original connectors, which luckily were undamaged. It also gave me the kick I needed to redo the pulleys on the top, which are just blobs on the original. I used my Silhouette plotter to cut the parts.
This is now mounted in place, and most of the ignition wiring done, but, inevitably ran out of shrink tubing with only one to make. There's more on the way, so I'll post a pic when it's complete.
Cheers,
Gareth