Hey all,
thanks for the reply's above. The work continues on the megaTQS. I'm now running into another issue or two that may be related.
Issue 1. The Antenna pot on the TQS only registers 1/2 of the travel while looking at it in MMJOY. (see attached photo. this is the gold/yellow line)
Issue 2. The throttle pot doesn't quite register all the way to the top (again, see photo). If I push the pot all the way down into the holder, then it seems to register, but when I assemble the throttle back together, I run into this problem. It seems like the throttle portion won't quite seat correctly/evenly into the base, either it's down all the way on the POT side or it's down all the way on the arm side. If I remove the throttle tension arm, everything seems to seat ok. Kbird, I know you have a lot of experience with the TQS...any ideas?

Thanks gang. I have one other design/button question, but I'll ask that later.