Someone has removed the Header Pins from the PCB at the bottom , I marked them in yellow for you , so you need to replace them with a standard male pins like the others (1.1mm?) as you need 3 of them. (see the 6th image below brown and black are not used) Two of the Pins on the SR PCB are not used ...at least not in my FLCS , the wires were cut off at the factory ....I have added images below for you ....I have more if you need them too.
The other Holes marked in RED are where the wires that go down the Shaft handle to the Main PCB were attached , On mine I actually added Male pins too, as I kept breaking the wires off , but if you do that you need to remove the plastic parts of the Dupont connector and cover the metal inner part with heat shrink instead or you cant quite close the Handle again. NOTE THE COLOURS OF THE WIRES ...(important) and see pic (below) telling you what they are....
4mm diametrically magnetised magnets come with the TLE5010 boards if you ordered them off AliExpress ?
