I am having trouble with the TLE5010 Boards on the FLCS axis's , one in particular moves in the opposite direction 1st then goes in the right direction , this happens in VKB and in the Sim I tried too last night (EF2000 Reloaded). I also made a mistake at 1st when I install the converted POT shafts for them ..I used 1/4" metal Washers as spacers and they were affecting the magnetic field etc , I don't know enough about them to know if it is faulty , or if I have damaged them somehow unfortunately, but I will try swapping them out with the other pair I have and see if it helps , other wise I guess i will reinstall standard POTS as it is unflyable at the moment. EF2000 showed me that 3 of the 4 axis's on the FLCS were seen reversed by Windows so I had to use the Invertion check box in MMjoy for those Axis's , I am not sure if that is part of the TLE5010 issue?. KB
Sorry Kbird, I don`t understand what is problem with TLE5011. Could you explain it to me again?
EDIT: maybe I know what`s the problem, try to set "Magnet offset" check box on the problematic axe, save it and calibrate, again save it. Try it. And Invertion check box is working for TLE5011 of course.