Forget that RESET button, this is to be used only ONE time during firmware flash procedure, you did this, looks that your MMJoy2 controller is ready.

> Do I use USB Name on top right side to give name?

Yes in place of MMjoy2 you can type the name what you want use - up to 10 characters, e.g MyJoy, MyThrottle, MyRudder to make easy identify then in games controls - or leave as is.

> What are VID/PID numbers?

Numbers that make joystick controller unique for Windows/Games, manufactures has their own numbers, e.g. 06a3/0471 identifies a Saitek Cyborg joystick.

For our purposes, use 0001/0001 if you want that you new joystick controller will be seen be Windows/Games first than other joysticks, example the above Cyborg.

But if you want that your new joystick controller - e.g. you will use then for button box - be seen after other existing joysticks use a high number, e.g. 9999/9999.

You can see actual VID/PID numbers used be joysticks plugged in your computer with USBDview in MMjoy2 package Tools folder.

BTW - If you change that VID/PID numbers after set then one time is need hit the "CLEAR SETS" button in MMJoySetup or Windows continue look for the old number and don't see the controller anymore - but this will work in games, is just Windows Registry issue.