Open MMjoySetup.exe, look in USB devices (together with you keyboard, mouse...) for "MjReset" or something similar, this is your new "JOYSTICK CONTROLLER".
Now you need give then a name, VID/PID numbers, number of axes, buttons, etc, and "SAVE SETTINGS FOR DEVICE".
Yes thinks look correct to me in MMJoy2 setup (no switches or anything attached now) see attached. Do I use USB Name on top right side to give name? What are VID/PID numbers?
I was expecting to see device in HID's in Device Manager as this is what instructions from last section in "https://github.com/MMjoy/mmjoy_en/wiki/Firmware-upload" describes. See "Upon successful completion, a new device "MMJOY2", or "HID-compliant vendor-defined device" will be displayed in device manager under HID devices". Nothing shows in my Device Manager at this point. Is this related to having no switches attached? See 2nd attached file for DM list.
Originally Posted by Kbird
I have found that a double tap of the reset button works best for getting the Leo/Pro into bootloader mode.
Yes Kbird the double tap of wires is how I go it to work correctly.
