I am modding my FLCS+TQs + ProPedals Combo to USB and so far I have modded my CH ProPedal and used a Gameport Connector so I can detach them from the TQS if needed , They seem to work fine , so I am testing the Pedals with my TQS Leonardo via Female Jumper pins from the DB15 Plug's 5 pins I used and attached the Pedals to the Leonardo Axis Pins (AI pins)and it seems to be good/working In MMJoy2 and I have assigned Sources (IntSensor) and Assignments in MMJoy2 but I am not sure I have the Assignments right for a Rudder as MMJoy still says 0 Axis Used even though it is polling the IntSensors.
Currently I have these Assignments as I am Assuming r(X) means Rudder as I can't find any Docs explaining MMJoy Assignments in the latest Firmware
rZ = Rudder rY = Left toe Brake rZ = Right Toe Brake
Thanks for any help putting me on the right Track ....
