For TLE5010 PCB you need - preferable in SMD 1206 format, not too small to solder manually and avoid the use of 0,6mm drill case use pass through components:
R1-R4 - 10-100 OHM, optional. For protection on long wires. R5-R6 - 1-10 kOHM, required. Need to hold up "data" and "select" digital lines. C1 - 0.1uF (ceramic 104), required. Used on all sorts of applications to decouple ICs from power supplies. C2 - 10uF (tantal A), optional. These capacitor are great transient/surge suppressor.