Mine is on its 5th,

This past weekend had several crashes whcih I assumed were linked to GPUs.

As screen would have corruped desktop rendered etc,

BSODs were occuring whenever I was running a hardware accelerated Program (3Ds Max, Game Engines, Photoshop, MY MP3 software, etc)

Saturday Kernel dumped, didnt see the error code because I was on remote desktop,
Was unable to connect back, when I got home The system was in a BIOS halted stated with Debug beeps and LED Code reporting no VGA, lol I have 3 of them in there!

Saturday night, had a few more crashes, same thing Kernel dump, reboot start loading windows, then BIOS halt.

Sunday Same thing, Except the BIOS Halts were a mix of "No VGA" and "PCIe Device Error"

During this time every few boots my Xfi PCI card was also MIA. (Wierd Right?)

Wednesday Night I pulled the entire thing apart and cleaned, put back together, and booted, same result. Except the BSODs were now within 10 to 15 minutes of loading windows, regardless of activity.

Booted my Windows 10 insider install, same thing randomized quick crashes.

Finally Wednesday Night, the last crash and BIOS halt after reported Chipset Init. Error Code, Manual Says to Clear CMOS.

I tested with 1 GPU, and system still took a dump when using either of the 3.

No way all 3 GPUs go bad at the exact same time.

They all pass Furmark burn in with no problems.

So my system is sitting idle waiting for my day off to clear the bios and restore essential settings.


HAF922, Corsair RM850, ASRock Fata1ity 990FX Pro,
Modified Corsair H100, AMD FX8350 @ 5.31GHz, 16GB G.SKILL@DDR2133,
2x R7970 Lightnings, +1 HD7950 @ 1.1/6.0GHz, Creative XFi Fata1ity Platinum Champ.,
3x ASUS VS248HP + Hanns�G HZ201HPB + Acer AL2002 (5760x1080+1600x900+1680x1050), Oculus Rift CV
CH Fighterstick, Pro Throt., Pro Pedals, TM Warthog & MFDs, Fanatec CSR Wheel/Shifter, Elite Pedals
Intensity Pro 10-Bit, TrackIR 4 Pro, WD Black 1.5TB, WD Black 640GB, Samsung 850 500GB, My Book 4TB