homepage

Making Warthog Throttle slider work zoom

Posted By: davisd100

Making Warthog Throttle slider work zoom - 05/25/13 08:06 PM

I have been struggling to make A-10C recognise and respond to my "trim" slider on my throttle to operate zooming in and out. Although it sees the control in the Options menu, and in the calibration menu in it, in the game it does not seem to respond at all. Any ideas as to what might be blocking it. I see from other forums that others have made it work...

Thanks in advance.
Posted By: Frederf

Re: Making Warthog Throttle slider work zoom - 05/26/13 02:45 PM

A-10C_Sim> Axis Commands> Throttle TM Warthog> Zoom View> JOY SLIDER 1
Confirm that the control moves the axis with the AXIS TUNE button. Wiggle the control and make sure the box moves as well.

If anything else is controlling the view zoom it might override it. TrackIR? Btw, this "zoom view" control will only work in cockpit. For external views it's a separate one.
Posted By: Peally

Re: Making Warthog Throttle slider work zoom - 06/04/13 03:17 AM

It's what I'm using now with TrackIR and no issues to report. Wish it was a little easier to reach on the throttle but what you gonna do.
Posted By: Molasses

Re: Making Warthog Throttle slider work zoom - 06/11/13 11:37 AM

I have one slider mapped to a key stroke in the profiler. It was the only way I could get it to work.
Posted By: Thermal

Re: Making Warthog Throttle slider work zoom - 04/27/15 07:43 AM

You cannot assign the "General" class View Zoom to anything other than TrackIR.

You can assign the View Zoom to each specific aircraft.
© 2024 SimHQ Forums