453RaafSpitty / Kelly
IF you're trying to replicate the Throttle Quadrant Assembly accurately, you will also need a couple of other drawings.
Some of the drawing below, are superseded by the next drawing however, these drawings are in such bad shape, and some are close to unreadable, that having extra (earlier / later) drawings, allows you to get info from one drawing, that's unreadable in another. Most of these drawing changed very little as they went through revision changes. Typically, they only changed small items, as the weight, sizing and mounting requirements, stayed the same for the designers. Otherwise you have to build a completely new / modified airframe...such as the P-51K
All of these are available on AirCorps Library.
https://aircorpslibrary.com/$5.00 a month is pretty cheap to access any drawings you need. They do allow you to quit your monthly membership at anytime as well.
Hope this helps.
Drawing - 102-43026 - BRACKET ASSEM. - ENGINE CONTROL QUADRANT
Drawing - 104-43126 - BRACKET ASSEM - ENGINE CONTROL QUADRANT
Drawing - 117-43085 - BRACKET ASSEM. - ENGINE CONT. QUAD. SUPPORT
Drawing - 73-43026 - BRACKET ASSEM. - ENGINE CONTROL QUADRANT
Drawing - 73-43011 - BRACKET ASSEM. - ENG. CONTROL THROTTLE & MIX. JACK SHAFT