Previous Thread
Next Thread
Print Thread
Rate This Thread
Hop To
Page 1 of 4 1 2 3 4
#4140503 - 06/28/15 03:57 PM Selling engine control unit and mechanization "RUD 4x4"  
Joined: Jun 2015
Posts: 475
GVL224 Offline
Member
GVL224  Offline
Member

Joined: Jun 2015
Posts: 475
Полт&#...
The control unit is equipped with 4-axis GVL224 on iron mechanics with bearings (it is possible to purchase separately as a mechanic KIT sets), two of them (the throttle and propeller pitch) with proximity sensors MagRez, the rest of the variable resistor, the four axes on the front of the variable resistor, 15 buttons, non-latching switch in the left position and locked in the right (useful for TC) on the handle ore, 8 buttons on the front panel of the base and 4 switch without fixing in extreme positions (more like 8 keys). Total have 8 axes and 32 buttons. The controller can connect more buttons and toggle switches, but then you have to use the mapper ... I wanted to avoid this.
Controller GVL224-4096-8, also can set MJ16. Any other controller is acquired and installed by the buyer alone.
The body is made of transparent acrylic 3 mm thick, going as 3D puzzle ...
The size of the base is almost like a sheet of A4 (305 * 210mm). Housing height 50mm.
Price $ 250




Inline advert (2nd and 3rd post)

#4140512 - 06/28/15 04:19 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: GVL224]  
Joined: Sep 2002
Posts: 124
JBuzzman69 Offline
Member
JBuzzman69  Offline
Member

Joined: Sep 2002
Posts: 124
Connecticut USA
Paypal?


Heatware JBuzzman69
Beerology JBuzzman69
#4140519 - 06/28/15 05:01 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: JBuzzman69]  
Joined: Jun 2015
Posts: 475
GVL224 Offline
Member
GVL224  Offline
Member

Joined: Jun 2015
Posts: 475
Полт&#...
Originally Posted By: JBuzzman69
Paypal?

I live in Ukraine, I do not have paypal, possibly through WesternUnion.

#4140568 - 06/28/15 08:24 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: GVL224]  
Joined: Jan 2001
Posts: 2,560
THX-1138 Offline
Tyrell Corporation
THX-1138  Offline
Tyrell Corporation
Senior Member

Joined: Jan 2001
Posts: 2,560
Miami, Florida - United States...
Beautiful piece of workmanship! It would be great in black with ergonomic thruster handles and buttons. Impressive.


Domestic Robotics - www.DomesRO.com

#4140683 - 06/29/15 05:54 AM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: THX-1138]  
Joined: Jun 2015
Posts: 475
GVL224 Offline
Member
GVL224  Offline
Member

Joined: Jun 2015
Posts: 475
Полт&#...
Originally Posted By: THX-1138
Beautiful piece of workmanship! It would be great in black with ergonomic thruster handles and buttons. Impressive.

It will not be the only copy ...
Yet will I gather such panel.
When ordering, you can agree on the color you want, handles other form is present.

#4146342 - 07/14/15 12:48 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: GVL224]  
Joined: Jun 2015
Posts: 475
GVL224 Offline
Member
GVL224  Offline
Member

Joined: Jun 2015
Posts: 475
Полт&#...
This instance is sold!
in the second instance of the assembly, slightly modified.

#4150245 - 07/24/15 05:06 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: GVL224]  
Joined: Jun 2015
Posts: 475
GVL224 Offline
Member
GVL224  Offline
Member

Joined: Jun 2015
Posts: 475
Полт&#...
The second copy of "RUD 4x4" in the case of the "milk" acrylic and proximity sensors (magrezy) on all 4 axes mechanics, controller at 4096 samples per axle.
The price of 200 US dollars.

#4154798 - 08/07/15 12:21 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: GVL224]  
Joined: Jun 2015
Posts: 475
GVL224 Offline
Member
GVL224  Offline
Member

Joined: Jun 2015
Posts: 475
Полт&#...
"White" is sold.
In assembling the throttle to the handle of the Cougar ...

#4162354 - 08/28/15 06:15 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: GVL224]  
Joined: Jun 2015
Posts: 475
GVL224 Offline
Member
GVL224  Offline
Member

Joined: Jun 2015
Posts: 475
Полт&#...
Another left to the owner ...

#4163431 - 08/31/15 04:05 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: GVL224]  
Joined: Jun 2015
Posts: 475
GVL224 Offline
Member
GVL224  Offline
Member

Joined: Jun 2015
Posts: 475
Полт&#...
Today gathered rod handle mounting from Cougar, I liked the result.

#4166733 - 09/09/15 12:29 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: GVL224]  
Joined: Jun 2015
Posts: 475
GVL224 Offline
Member
GVL224  Offline
Member

Joined: Jun 2015
Posts: 475
Полт&#...
Throttle "RUD Cougar" !

#4166758 - 09/09/15 01:23 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: GVL224]  
Joined: Jun 2006
Posts: 471
MudPuppy Offline
Member
MudPuppy  Offline
Member

Joined: Jun 2006
Posts: 471
Appalachian foothills in Virgi...
These are works of art AND great looking peripherals. Very fine work!
Derek

#4166818 - 09/09/15 03:38 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: GVL224]  
Joined: Jul 2013
Posts: 45
MCUSA Offline
Junior Member
MCUSA  Offline
Junior Member

Joined: Jul 2013
Posts: 45
Man these engine control units look amazing! Just out of curiosity, how hard do you think would it be to have a rudder toggle axis and/or toe brakes as axis inputs? I don't have much room in my Obutto Ozone for rudder pedals so if that is possible, that would be awesome. Also, do your units take USB controller priority vs. other devices? I've dealt with that problem a lot in sim racing and would like to try and avoid it as much as I can.

#4166837 - 09/09/15 04:24 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: MudPuppy]  
Joined: Jun 2015
Posts: 475
GVL224 Offline
Member
GVL224  Offline
Member

Joined: Jun 2015
Posts: 475
Полт&#...
Originally Posted By: MudPuppy
These are works of art AND great looking peripherals. Very fine work!
Derek

Thank you.

#4166838 - 09/09/15 04:26 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: MCUSA]  
Joined: Jun 2015
Posts: 475
GVL224 Offline
Member
GVL224  Offline
Member

Joined: Jun 2015
Posts: 475
Полт&#...
Originally Posted By: MCUSA
Man these engine control units look amazing! Just out of curiosity, how hard do you think would it be to have a rudder toggle axis and/or toe brakes as axis inputs? I don't have much room in my Obutto Ozone for rudder pedals so if that is possible, that would be awesome. Also, do your units take USB controller priority vs. other devices? I've dealt with that problem a lot in sim racing and would like to try and avoid it as much as I can.

On the brake pedal and may work only need to install them for the return spring.
Problems my controller work with other not met.

#4167419 - 09/10/15 10:27 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: GVL224]  
Joined: Nov 2001
Posts: 3,955
Sokol1 Offline
Senior Member
Sokol1  Offline
Senior Member

Joined: Nov 2001
Posts: 3,955
Internet
Originally Posted By: GVL224
Originally Posted By: MCUSA
Also, do your units take USB controller priority vs. other devices?


Problems my controller work with other not met.


GVL224,

To further clarify. The question is: in Windows Control Panel > Games Controllers your device is show first or after other devices (joystick, pedal)?

Or, your device VID and PID have a low number: 0001, 0002... or a high number: 8888, 9999?

Example, I have plugged there:


image url upload

MRUS is a Mjoy controller with VID and PID 0001/0001
VKB Tiny Box VID and PID is 231D/011D
Rudder is a MMjoy2 VID and PID is 8888/8888

And, you can set this VID/PID number as the buyer ask?

MCUSA

A option for don't use rudder pedal or twist rudder on joystick is a mini-joystick (PS2 like) on throttle, as this device is axis and have spring to return to center. Example the one in CH PRO throttle.

Or a solution like in the Saitek X-36 throttle, a rocker switch.





#4168575 - 09/14/15 12:14 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: GVL224]  
Joined: Jun 2015
Posts: 475
GVL224 Offline
Member
GVL224  Offline
Member

Joined: Jun 2015
Posts: 475
Полт&#...
VID - 0000 and PID - 0110

#4175516 - 09/30/15 06:37 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: GVL224]  
Joined: Jun 2015
Posts: 475
GVL224 Offline
Member
GVL224  Offline
Member

Joined: Jun 2015
Posts: 475
Полт&#...

#4240178 - 03/15/16 05:57 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: GVL224]  
Joined: Jun 2015
Posts: 475
GVL224 Offline
Member
GVL224  Offline
Member

Joined: Jun 2015
Posts: 475
Полт&#...
up

#4246860 - 04/05/16 07:31 PM Re: Selling engine control unit and mechanization "RUD 4x4" [Re: GVL224]  
Joined: Jun 2015
Posts: 475
GVL224 Offline
Member
GVL224  Offline
Member

Joined: Jun 2015
Posts: 475
Полт&#...
Individual order, under the handle Cougar


Page 1 of 4 1 2 3 4

Moderated by  RacerGT 

Quick Search
Recent Articles
Support SimHQ

If you shop on Amazon use this Amazon link to support SimHQ
.
Social


Recent Topics
Carnival Cruise Ship Fire....... Again
by F4UDash4. 03/26/24 05:58 PM
Baltimore Bridge Collapse
by F4UDash4. 03/26/24 05:51 PM
The Oldest WWII Veterans
by F4UDash4. 03/24/24 09:21 PM
They got fired after this.
by Wigean. 03/20/24 08:19 PM
Grown ups joke time
by NoFlyBoy. 03/18/24 10:34 PM
Anyone Heard from Nimits?
by F4UDash4. 03/18/24 10:01 PM
RIP Gemini/Apollo astronaut Tom Stafford
by semmern. 03/18/24 02:14 PM
10 years after 3/8/2014
by NoFlyBoy. 03/17/24 10:25 AM
Copyright 1997-2016, SimHQ Inc. All Rights Reserved.

Powered by UBB.threads™ PHP Forum Software 7.6.0