Previous Thread
Next Thread
Print Thread
Rate This Thread
Hop To
Page 1 of 2 1 2
#3552703 - 04/08/12 01:26 PM My Build Begins,  
Joined: Mar 2012
Posts: 198
TGFan Offline
Member
TGFan  Offline
Member

Joined: Mar 2012
Posts: 198
It's build day! Months of planning and trying to talk myself out of the costs are a thing of the past. My parts are here and after watching the Newegg 3 part video of how to plenty of times, the build begins. I'm off to pick up some reusable zip ties that I forgot earlier. Thanks for all of the help and input; this commutiy is one of the best hands down.

Wish me luck!


Intel Core i7 2700k Processor / Asus P8Z68 DeluxeGEN3 MB / 16GB Ripsaw DDR RAM / EVGA nVidia GTX680 Vid Card / WD 1TB Hard Disk / Sandisk 240 SSD / Samsung BluRay-DVD Combo / Corsair 850W Power Supply / Cooler Master HAF 932 Adv Case / Cooler Master V8 CPU Cooler
Inline advert (2nd and 3rd post)

#3552712 - 04/08/12 02:22 PM Re: My Build Begins, [Re: TGFan]  
Joined: Jan 2002
Posts: 5,595
The Nephilim Online tunes
S3D GuRu
The Nephilim  Online Tunes
S3D GuRu
Hotshot

Joined: Jan 2002
Posts: 5,595
3rd Stone from the Sun !!
Hey That is GREAT. Just take your time building it and just follow the directions or if you get stuck just post here.

Take some pics along the way and after the build you can post pics of your Components.. I myself always read the Build logs.. it is always a good day when one gets new hardware..

Dont forget your Thermal paste for the CPU.. unless your heatsink comes with it preapplied..


Intel i7 10700K @ 4.8GHZ / ASRock Z590 Phantom Gaming 4AC Motherboard / Asus 1080GTX OC / SoundBlaster Z / Windows 10 64bit / Reverb G2 VR Gear. / Thrustmaster Cougar + MFD's / Buttkicker Simulation / Thrustmaster Cougar
#3552719 - 04/08/12 02:43 PM Re: My Build Begins, [Re: TGFan]  
Joined: Jun 2005
Posts: 16,082
- Ice Offline
Veteran
- Ice  Offline
Veteran

Joined: Jun 2005
Posts: 16,082
Philippines / North East UK
OOoooooo... build day! Good luck, and hope it boots up first time!


- Ice
#3552724 - 04/08/12 02:56 PM Re: My Build Begins, [Re: TGFan]  
Joined: Mar 2012
Posts: 198
TGFan Offline
Member
TGFan  Offline
Member

Joined: Mar 2012
Posts: 198
Thermal paste, check! I'll be sure to take some pics. I already have one of the case opened up. VERY impressed with it, all of the accessories was a nice touch.

I have a quick question about the LAN drivers. There are FOUR listed for the ASUS P8Z68 Deluxe/Gen3. Do I download and install ALL of them, or do I pick just one? This is the only driver question I have. All of the others were pretty straight forward. The USB driver section had 2 choices however the file size for them was exactly the same so I picked the later dated one. PLEASE let me know what you think about the LAN drivers.

Thanks again,
Mark


Intel Core i7 2700k Processor / Asus P8Z68 DeluxeGEN3 MB / 16GB Ripsaw DDR RAM / EVGA nVidia GTX680 Vid Card / WD 1TB Hard Disk / Sandisk 240 SSD / Samsung BluRay-DVD Combo / Corsair 850W Power Supply / Cooler Master HAF 932 Adv Case / Cooler Master V8 CPU Cooler
#3552729 - 04/08/12 03:02 PM Re: My Build Begins, [Re: TGFan]  
Joined: Jun 2005
Posts: 16,082
- Ice Offline
Veteran
- Ice  Offline
Veteran

Joined: Jun 2005
Posts: 16,082
Philippines / North East UK
You might want the latest for the LAN drivers as well... no sense in installing 4.


- Ice
#3552738 - 04/08/12 03:09 PM Re: My Build Begins, [Re: TGFan]  
Joined: Mar 2012
Posts: 198
TGFan Offline
Member
TGFan  Offline
Member

Joined: Mar 2012
Posts: 198
Jeez, thanks for the quick reply!!! So basically they all do the same thing, just different ways of getting there? I'll take the latest then.


Intel Core i7 2700k Processor / Asus P8Z68 DeluxeGEN3 MB / 16GB Ripsaw DDR RAM / EVGA nVidia GTX680 Vid Card / WD 1TB Hard Disk / Sandisk 240 SSD / Samsung BluRay-DVD Combo / Corsair 850W Power Supply / Cooler Master HAF 932 Adv Case / Cooler Master V8 CPU Cooler
#3552894 - 04/08/12 08:42 PM Re: My Build Begins, [Re: TGFan]  
Joined: Mar 2012
Posts: 198
TGFan Offline
Member
TGFan  Offline
Member

Joined: Mar 2012
Posts: 198
Almost finished with the build....haven't flipped the red switch yet. I only have two questions so far.

1) What to do with the red front SATA cable coming from my case. CoolerMaster Haf 932 ASUS P8Z68 Deluxe/Gen 3

2) On my Western Digital hard drive, there is an extra connection on the back an 8 pin male. Not sure what connector fits over that, if any.


Intel Core i7 2700k Processor / Asus P8Z68 DeluxeGEN3 MB / 16GB Ripsaw DDR RAM / EVGA nVidia GTX680 Vid Card / WD 1TB Hard Disk / Sandisk 240 SSD / Samsung BluRay-DVD Combo / Corsair 850W Power Supply / Cooler Master HAF 932 Adv Case / Cooler Master V8 CPU Cooler
#3552906 - 04/08/12 09:01 PM Re: My Build Begins, [Re: TGFan]  
Joined: May 2010
Posts: 3,812
JAMF Offline
Frugalite & P-38 fan
JAMF  Offline
Frugalite & P-38 fan
Senior Member

Joined: May 2010
Posts: 3,812
The Netherlands
Originally Posted By: TGFan
Almost finished with the build....haven't flipped the red switch yet. I only have two questions so far.

1) What to do with the red front SATA cable coming from my case. CoolerMaster Haf 932 ASUS P8Z68 Deluxe/Gen 3

2) On my Western Digital hard drive, there is an extra connection on the back an 8 pin male. Not sure what connector fits over that, if any.


1) it's for the eSATA port on the front of your case. Look in the manual, for the SATA connector on your motherboard that can be changed in the BIOS to eSATA.

Also, set your BIOS to AHCI as it is the newer more advanced SATA standard.

2) Disregard that connector. Not used by 'us'.

#3552910 - 04/08/12 09:05 PM Re: My Build Begins, [Re: TGFan]  
Joined: Jul 2002
Posts: 2,849
Falstar Offline
Senior Member
Falstar  Offline
Senior Member

Joined: Jul 2002
Posts: 2,849
Edina, MN 55439
Originally Posted By: TGFan


2) On my Western Digital hard drive, there is an extra connection on the back an 8 pin male. Not sure what connector fits over that, if any.



http://wdc.custhelp.com/app/answers/detail/a_id/1400/c/185/p/227,295/search/1

#3552922 - 04/08/12 09:27 PM Re: My Build Begins, [Re: JAMF]  
Joined: Mar 2012
Posts: 198
TGFan Offline
Member
TGFan  Offline
Member

Joined: Mar 2012
Posts: 198
Originally Posted By: JAMF
Originally Posted By: TGFan
Almost finished with the build....haven't flipped the red switch yet. I only have two questions so far.

1) What to do with the red front SATA cable coming from my case. CoolerMaster Haf 932 ASUS P8Z68 Deluxe/Gen 3

2) On my Western Digital hard drive, there is an extra connection on the back an 8 pin male. Not sure what connector fits over that, if any.


1) it's for the eSATA port on the front of your case. Look in the manual, for the SATA connector on your motherboard that can be changed in the BIOS to eSATA.

Also, set your BIOS to AHCI as it is the newer more advanced SATA standard.

2) Disregard that connector. Not used by 'us'.


JAMF, not sure how to change the BIOS to AHCI right now. I just plugged the cord into one of the ports with the rest of the SATA connections.

HOWEVER....I'm happy to report that SHE'S BREATHING!!!!!!! All of the plugs are in, got the POST boot, all fans are running, LEDS are lit, beeped at me and everything! I can't tell you how relieved and happy I am. There's a palpable sense of my being proud of myself. I couldn't have done it without Paul's vids from Newegg but I still did it, with some help from you guys. I'm sure I'll have some more questions a about drivers and such, but it's done. I've got a spare parts box now not to mention a destroyed kitchen! haha I took a bunch of pics along the way so I'll get them up when I can (do you have to host pics?).

Thanks again guys...I'm going to sit down for a minute and catch my breath.


Intel Core i7 2700k Processor / Asus P8Z68 DeluxeGEN3 MB / 16GB Ripsaw DDR RAM / EVGA nVidia GTX680 Vid Card / WD 1TB Hard Disk / Sandisk 240 SSD / Samsung BluRay-DVD Combo / Corsair 850W Power Supply / Cooler Master HAF 932 Adv Case / Cooler Master V8 CPU Cooler
#3552968 - 04/08/12 11:13 PM Re: My Build Begins, [Re: TGFan]  
Joined: May 2010
Posts: 3,812
JAMF Offline
Frugalite & P-38 fan
JAMF  Offline
Frugalite & P-38 fan
Senior Member

Joined: May 2010
Posts: 3,812
The Netherlands
Well apparently the BIOS on that motherboard defaults the SATA mode to AHCI, from what I've read on the XBit labs review, so you're fine on that point.

Congrats on enjoying your Frankenstein moment: "It's alive... ALIVE!" winkngrin

#3552974 - 04/08/12 11:25 PM Re: My Build Begins, [Re: TGFan]  
Joined: Jan 2002
Posts: 5,595
The Nephilim Online tunes
S3D GuRu
The Nephilim  Online Tunes
S3D GuRu
Hotshot

Joined: Jan 2002
Posts: 5,595
3rd Stone from the Sun !!
yes my brother in law just got a new pc the otherday for his business and it was default on AHCI, I also did NOt need to AHCI drivers pre win install..

I know on my current board I need to install the AHCI Driver prior to installing windows. I wonder what was changed to make it work without installing drivers??

Also you should now stress test the PC you just built to make sure it is stable.. Even if you do NOT OC your PC it is good to do a stress test to check stability of the PC. Best to find out know vs deep in a mission or something and Blaam BSOD!!

It is relatively simple you can run LynX (Stress Tester) and Real Temp to monitor your temps to make sure the CPU stays within its Operating specs..

Just run Lynx for about 10 minutes while monitoring your CPU Temps.. You can also do the same for your Video card get FurMark it has a good burn in test to stress the video card..also make sure you get a tool like MSI Afterburner to monitor those temps of the Vid card..






Last edited by The Nephilim; 04/08/12 11:27 PM.

Intel i7 10700K @ 4.8GHZ / ASRock Z590 Phantom Gaming 4AC Motherboard / Asus 1080GTX OC / SoundBlaster Z / Windows 10 64bit / Reverb G2 VR Gear. / Thrustmaster Cougar + MFD's / Buttkicker Simulation / Thrustmaster Cougar
#3553082 - 04/09/12 05:17 AM Re: My Build Begins, [Re: TGFan]  
Joined: Nov 2004
Posts: 17,632
SkateZilla Offline
Skate Zilla Graphics
SkateZilla  Offline
Skate Zilla Graphics
Veteran

Joined: Nov 2004
Posts: 17,632
Virginia Beach, VA
wear a static bracelet, i dont care what anyone else says, not wearing one is asking for trouble.


HAF922, Corsair RM850, ASRock Fata1ity 990FX Pro,
Modified Corsair H100, AMD FX8350 @ 5.31GHz, 16GB G.SKILL@DDR2133,
2x R7970 Lightnings, +1 HD7950 @ 1.1/6.0GHz, Creative XFi Fata1ity Platinum Champ.,
3x ASUS VS248HP + Hanns�G HZ201HPB + Acer AL2002 (5760x1080+1600x900+1680x1050), Oculus Rift CV
CH Fighterstick, Pro Throt., Pro Pedals, TM Warthog & MFDs, Fanatec CSR Wheel/Shifter, Elite Pedals
Intensity Pro 10-Bit, TrackIR 4 Pro, WD Black 1.5TB, WD Black 640GB, Samsung 850 500GB, My Book 4TB
#3553242 - 04/09/12 04:20 PM Re: My Build Begins, [Re: TGFan]  
Joined: Nov 2004
Posts: 17,632
SkateZilla Offline
Skate Zilla Graphics
SkateZilla  Offline
Skate Zilla Graphics
Veteran

Joined: Nov 2004
Posts: 17,632
Virginia Beach, VA
Originally Posted By: TGFan
Almost finished with the build....haven't flipped the red switch yet. I only have two questions so far.

1) What to do with the red front SATA cable coming from my case. CoolerMaster Haf 932 ASUS P8Z68 Deluxe/Gen 3

2) On my Western Digital hard drive, there is an extra connection on the back an 8 pin male. Not sure what connector fits over that, if any.


1. Should just plug into one of the last SATA Ports and the board, dont remember if my case had the power separate or not, i think it did.
as long as BIOS as eSATA/AHCI enabled you can plug n play eSATA Drives.

2. the 8 pin male array is used for debug and backward compatibility (limiting SATA mode, limiting Size, etc etc)


HAF922, Corsair RM850, ASRock Fata1ity 990FX Pro,
Modified Corsair H100, AMD FX8350 @ 5.31GHz, 16GB G.SKILL@DDR2133,
2x R7970 Lightnings, +1 HD7950 @ 1.1/6.0GHz, Creative XFi Fata1ity Platinum Champ.,
3x ASUS VS248HP + Hanns�G HZ201HPB + Acer AL2002 (5760x1080+1600x900+1680x1050), Oculus Rift CV
CH Fighterstick, Pro Throt., Pro Pedals, TM Warthog & MFDs, Fanatec CSR Wheel/Shifter, Elite Pedals
Intensity Pro 10-Bit, TrackIR 4 Pro, WD Black 1.5TB, WD Black 640GB, Samsung 850 500GB, My Book 4TB
#3553245 - 04/09/12 04:22 PM Re: My Build Begins, [Re: The Nephilim]  
Joined: Nov 2004
Posts: 17,632
SkateZilla Offline
Skate Zilla Graphics
SkateZilla  Offline
Skate Zilla Graphics
Veteran

Joined: Nov 2004
Posts: 17,632
Virginia Beach, VA
Originally Posted By: The Nephilim
yes my brother in law just got a new pc the otherday for his business and it was default on AHCI, I also did NOt need to AHCI drivers pre win install..

I know on my current board I need to install the AHCI Driver prior to installing windows. I wonder what was changed to make it work without installing drivers??

Also you should now stress test the PC you just built to make sure it is stable.. Even if you do NOT OC your PC it is good to do a stress test to check stability of the PC. Best to find out know vs deep in a mission or something and Blaam BSOD!!

It is relatively simple you can run LynX (Stress Tester) and Real Temp to monitor your temps to make sure the CPU stays within its Operating specs..

Just run Lynx for about 10 minutes while monitoring your CPU Temps.. You can also do the same for your Video card get FurMark it has a good burn in test to stress the video card..also make sure you get a tool like MSI Afterburner to monitor those temps of the Vid card..




SATA Controller Chip, some controllers were out prior to win7, so the drivers are included in the installer .cabs


HAF922, Corsair RM850, ASRock Fata1ity 990FX Pro,
Modified Corsair H100, AMD FX8350 @ 5.31GHz, 16GB G.SKILL@DDR2133,
2x R7970 Lightnings, +1 HD7950 @ 1.1/6.0GHz, Creative XFi Fata1ity Platinum Champ.,
3x ASUS VS248HP + Hanns�G HZ201HPB + Acer AL2002 (5760x1080+1600x900+1680x1050), Oculus Rift CV
CH Fighterstick, Pro Throt., Pro Pedals, TM Warthog & MFDs, Fanatec CSR Wheel/Shifter, Elite Pedals
Intensity Pro 10-Bit, TrackIR 4 Pro, WD Black 1.5TB, WD Black 640GB, Samsung 850 500GB, My Book 4TB
#3553410 - 04/09/12 08:46 PM Re: My Build Begins, [Re: TGFan]  
Joined: Sep 2000
Posts: 22,095
citizen guod Offline
Lifer
citizen guod  Offline
Lifer

Joined: Sep 2000
Posts: 22,095
Congratulations TGFan! You should feel an accomplishment!

In addition to the good suggestions to run a stress test, run the machine day-and-night for 3-4 days, checking the heat and visually checking the fans are spinning.

Originally Posted By: TGFan
I took a bunch of pics along the way so I'll get them up when I can (do you have to host pics?).

SimHQ hosts pictures for registered members. Click on this icon and just follow the instructions. JPG and PNG supported. 950 pixels wide is the maximum width. You can add larger but the board will reduce it to 950. You'll get better quality by using 950 width from the start. Looking forward to seeing them!




Wisdom is knowing what's enough
#3553822 - 04/10/12 03:22 PM Re: My Build Begins, [Re: TGFan]  
Joined: Mar 2012
Posts: 198
TGFan Offline
Member
TGFan  Offline
Member

Joined: Mar 2012
Posts: 198
Been using my iPad to browse. Surely that's what's giving me probs.

I've been playing FSX on my 1080p TV via HDMI and so far I'm not very impressed. I have a monitor ordered and hopefully I'll see a difference. Also, I've got the game maxed out and I'm not seeing the butter FPS that I was expecting. I hope this build wasn't a bad idea. I guess I'll find out in a couple days.


The pre-build, I was SOOO happy when I got the POST boot. It's got a V-8 baby!!!


The back of the beast, prior to putting the back panel on. VERY tight so I had to lay the cables almost completely flat.


Inside of the completed product. VERY happy with the build and extremely proud of myself.





Last edited by TGFan; 04/10/12 03:35 PM.

Intel Core i7 2700k Processor / Asus P8Z68 DeluxeGEN3 MB / 16GB Ripsaw DDR RAM / EVGA nVidia GTX680 Vid Card / WD 1TB Hard Disk / Sandisk 240 SSD / Samsung BluRay-DVD Combo / Corsair 850W Power Supply / Cooler Master HAF 932 Adv Case / Cooler Master V8 CPU Cooler
#3553826 - 04/10/12 03:31 PM Re: My Build Begins, [Re: TGFan]  
Joined: Nov 2004
Posts: 6,493
JoeyJoJo Offline
Wurkin' man
JoeyJoJo  Offline
Wurkin' man
Hotshot

Joined: Nov 2004
Posts: 6,493
Colorado high-country
What are your specs? I searched this thread but couldn't find where you listed them

#3553866 - 04/10/12 04:11 PM Re: My Build Begins, [Re: JoeyJoJo]  
Joined: Nov 2004
Posts: 17,632
SkateZilla Offline
Skate Zilla Graphics
SkateZilla  Offline
Skate Zilla Graphics
Veteran

Joined: Nov 2004
Posts: 17,632
Virginia Beach, VA
Originally Posted By: NoUseForAName
What are your specs? I searched this thread but couldn't find where you listed them


http://simhq.com/forum/ubbthreads.php/topics/3544825/Time_For_A_New_Rig.html#Post3544825


HAF922, Corsair RM850, ASRock Fata1ity 990FX Pro,
Modified Corsair H100, AMD FX8350 @ 5.31GHz, 16GB G.SKILL@DDR2133,
2x R7970 Lightnings, +1 HD7950 @ 1.1/6.0GHz, Creative XFi Fata1ity Platinum Champ.,
3x ASUS VS248HP + Hanns�G HZ201HPB + Acer AL2002 (5760x1080+1600x900+1680x1050), Oculus Rift CV
CH Fighterstick, Pro Throt., Pro Pedals, TM Warthog & MFDs, Fanatec CSR Wheel/Shifter, Elite Pedals
Intensity Pro 10-Bit, TrackIR 4 Pro, WD Black 1.5TB, WD Black 640GB, Samsung 850 500GB, My Book 4TB
#3554024 - 04/10/12 09:10 PM Re: My Build Begins, [Re: JoeyJoJo]  
Joined: Mar 2012
Posts: 198
TGFan Offline
Member
TGFan  Offline
Member

Joined: Mar 2012
Posts: 198
Originally Posted By: NoUseForAName
What are your specs? I searched this thread but couldn't find where you listed them


Sorry about that, specs in sig block now. Not sure why frame rates aren't off the charts. I haven't done any sort of tweaking yet, however that still doesn't extinguish my concern frown


Intel Core i7 2700k Processor / Asus P8Z68 DeluxeGEN3 MB / 16GB Ripsaw DDR RAM / EVGA nVidia GTX680 Vid Card / WD 1TB Hard Disk / Sandisk 240 SSD / Samsung BluRay-DVD Combo / Corsair 850W Power Supply / Cooler Master HAF 932 Adv Case / Cooler Master V8 CPU Cooler
Page 1 of 2 1 2

Moderated by  RacerGT 

Quick Search
Recent Articles
Support SimHQ

If you shop on Amazon use this Amazon link to support SimHQ
.
Social


Recent Topics
Carnival Cruise Ship Fire....... Again
by F4UDash4. 03/26/24 05:58 PM
Baltimore Bridge Collapse
by F4UDash4. 03/26/24 05:51 PM
The Oldest WWII Veterans
by F4UDash4. 03/24/24 09:21 PM
They got fired after this.
by Wigean. 03/20/24 08:19 PM
Grown ups joke time
by NoFlyBoy. 03/18/24 10:34 PM
Anyone Heard from Nimits?
by F4UDash4. 03/18/24 10:01 PM
RIP Gemini/Apollo astronaut Tom Stafford
by semmern. 03/18/24 02:14 PM
10 years after 3/8/2014
by NoFlyBoy. 03/17/24 10:25 AM
Copyright 1997-2016, SimHQ Inc. All Rights Reserved.

Powered by UBB.threads™ PHP Forum Software 7.6.0