Forums » Air Combat & Civil Aviation » Falcon 4.0 » Problem with TripleHead2Go resolution and BMS


Topic Options
Rate This Topic
Hop to:
#3414662 - 10/20/11 11:11 AM Problem with TripleHead2Go resolution and BMS
Kraftschlag Offline
Junior Member

Registered: 10/19/11
Posts: 3
Hi,

i´m using 3 screens with a total resolution of 5040x1050. For using MFD´s and other stuff i have additional 4 other little TFT´s with each 640x480 res.

Now i´m having problems to set my needed 5040x1050 in BMS Setup-Graphics for cockpit mainview only.
The choosable resolutions are 4800x900 and next step is 5760x1080...

In Falcon BMS Display Extraction:
Left:0
Top:0
Width:Why not changable? (need 5040 there)
Height:Why not changable?(need 1050 there)

Is the an .ini file where to manually adjust resolutions?

This Mod is really great so far i´ve seen! Many thanks to the builders for their great work!!!

Greets
Kraftschlag

Top
#3414786 - 10/20/11 02:17 PM Re: Problem with TripleHead2Go resolution and BMS [Re: Kraftschlag]
The Nephilim Offline
3D GuRu
Senior Member

Registered: 01/26/02
Posts: 3544
Loc: 3rd Stone from the Sun !!
http://www.matrox.com/graphics/en/products/gxm/th2go/resolution/resolutions.html


those are the only resolutions you can run under windows look at the chart. Now getting those SAME resolutions in BMS is a different story..


Edited by The Nephilim (10/20/11 04:12 PM)
_________________________
Intel i5 2500k 4.50ghz / G.Skill RipJaws X 8gb / CM Hyper 212+ Heatsink & Fan / Asus P8Z68-V Gen3 Mobo / 2 Evga 480GTX SLI / RocketFish SC 7.1 / 3 - Sharp DLP XR-10XL's / 3 - 45" Screens w/Screen Goo / nVidia 3D vision / Win7 64bit OS / ThrustMaster Cougar HOTAS / Cougar MFD's / CM HAF 932 Full Tower / nVidia 3D Vision / Thrustmaster MFD's

Top
#3434251 - 11/14/11 08:58 PM Re: Problem with TripleHead2Go resolution and BMS [Re: Kraftschlag]
cass Offline
Junior Member

Registered: 03/24/07
Posts: 63

Ok, so i have the resolution i want with my th2g setup but i cant zoom the view out enough to view the entire cockpit. I cant see the switches on the left and right consoles. Any way to change the POV further out then 80? I need like 120...

Top
#3434264 - 11/14/11 09:25 PM Re: Problem with TripleHead2Go resolution and BMS [Re: Kraftschlag]
cass Offline
Junior Member

Registered: 03/24/07
Posts: 63
Ok, once again i found a partial fix to my own question. I adjusted the POV in the bmsconfig.dat file to 120. Now can somebody tell me how to adjust the view so i can see the side consoles in the cockpit? there seems to be a discussion on this somewhere on the BMS forums but for some reason i cant see them (yes i registered)

Cass

Top
#3435197 - 11/16/11 06:49 AM Re: Problem with TripleHead2Go resolution and BMS [Re: Kraftschlag]
The Nephilim Offline
3D GuRu
Senior Member

Registered: 01/26/02
Posts: 3544
Loc: 3rd Stone from the Sun !!
Try increasing the view limit inside the 3D pit file.

*/Data/Art/ckptart/F-16C-50 (or whatever jet you need)
* = your install path


Its default to 50. try 70


viewlimit_pitch_down 50.0;



Remember to back up your files first
_________________________
Intel i5 2500k 4.50ghz / G.Skill RipJaws X 8gb / CM Hyper 212+ Heatsink & Fan / Asus P8Z68-V Gen3 Mobo / 2 Evga 480GTX SLI / RocketFish SC 7.1 / 3 - Sharp DLP XR-10XL's / 3 - 45" Screens w/Screen Goo / nVidia 3D vision / Win7 64bit OS / ThrustMaster Cougar HOTAS / Cougar MFD's / CM HAF 932 Full Tower / nVidia 3D Vision / Thrustmaster MFD's

Top
#3493573 - 01/12/12 02:48 PM Re: Problem with TripleHead2Go resolution and BMS [Re: Kraftschlag]
cass Offline
Junior Member

Registered: 03/24/07
Posts: 63
Sorry, i never did thank you for this fix. Had some other problems with my brand new computer and had to take it back. Bad MOBO.

Thanks for the fix it is totally amazing on the th2g.

Cass

Top
#3495624 - 01/15/12 04:13 PM Re: Problem with TripleHead2Go resolution and BMS [Re: Kraftschlag]
The Nephilim Offline
3D GuRu
Senior Member

Registered: 01/26/02
Posts: 3544
Loc: 3rd Stone from the Sun !!
Hey Man NP your Most Welcome just relaying Info I needed to get F4 BMS 4.32 Running on my Triple SCreen setup..

It is really cool in TripleScreen THNX Again BMS guys.. I plan on making a Donation to a Charity as requested by the BMS Guys..
_________________________
Intel i5 2500k 4.50ghz / G.Skill RipJaws X 8gb / CM Hyper 212+ Heatsink & Fan / Asus P8Z68-V Gen3 Mobo / 2 Evga 480GTX SLI / RocketFish SC 7.1 / 3 - Sharp DLP XR-10XL's / 3 - 45" Screens w/Screen Goo / nVidia 3D vision / Win7 64bit OS / ThrustMaster Cougar HOTAS / Cougar MFD's / CM HAF 932 Full Tower / nVidia 3D Vision / Thrustmaster MFD's

Top
Topic Options
Rate This Topic
Hop to:


Forum Use Agreement | Privacy Statement | SimHQ Staff
Copyright 1997-2012, SimHQ Inc. All Rights Reserved.